STERLING BARRELS
Developed by platers for platers. Sterling’s original mesh barrel provided the first practical method for plating a wide range of thin or miniature parts. Simplicity in overall design recognizes the plater’s need for equipment that operates day after day, without a lot of attention. Backing up this performance and common-sense design is Sterling’s reputation for quick response to unusual requirements with an unmatched stock of complete barrels and components for off-the-shelf delivery.
Certain Sterling cylinders feature a unique end-panel mesh construction. This additional mesh provides even greater solution and current transfer, resulting in faster, more uniform plating with reduced drag out. Each Sterling barrel is designed with many standard features enhancing overall performance including:
- Cylinder panels to enhance solution transfer (parts will not stick to mesh sides)
Quick acting clutch for proper positioning of cylinder when loading and unloading
Interchangeable mesh or square hole cylinders allows you freedom for full utilization of your equipment
Enclosed motor prevents moisture and humidity from disrupting operations
Lift tab enables easy door opening
Rugged construction designed for long service
Tight joints and smooth interior help eliminate rejects caused by parts catching joints
Sterling Barrel Model HD-24 – Lab
We offer a complete horizontal mini-plating barrel for your operation, featuring our unique 2 1/2″ x 4″ basket, available in single, double and triple configurations. This series is great for miniature production runs. The system is designed with mesh ends and constructed to provide uniform coverage and good mixing action with positive part retention. There are no door or section joints present to trap tiny parts. Rugged construction is ideal for small-lot production runs. Miniature barrels are designed with the stainless hardware below. We have solution levels for most applications, with titanium hardware available for strong acid baths.
Model 24 is Available as Follows:
- 2 1/2″ x 4″ basket cylinder – Standard Configuration
- 2 1/2″ x 2″ basket cylinder – Optional
- 2 1/2″ x 3″ basket cylinder – Optional
Mesh Basket Construction Options Includes:
- 0.004″ mesh opening
- 0.006″ mesh opening
- C-1 Mesh (0.008″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
Additional Options Include:
30 or 60 rpm – 110-Volt AC Motor; Optional DC & different RPMs available
Single, Double or Triple Basket Barrel Configurations
Sterling Barrel Model 44-46-56 – Miniature
Our miniature barrels feature all molded construction and include all-around mesh
design. They have their own motors, danglers and replaceable cylinders and are available in C, C-1 or B mesh.
Models 44, 46 & 56 Are Available as Follows:
- Standard Configuration
- 4″ x 4″, 4″ x 6″ or 5″ x 6″ Cylinder
- Mesh Panel Construction
- C-1 Mesh (0.01″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
- 30 or 60 rpm – 110 Volt AC Motor; Optional DC & different RPMs available
- Ball Rod or Floating Rod Danglers
- Titanium or Stainless Cylinder Panel Screws
Sterling Barrel Model 66-69-612 – Medium
Medium barrels are designed to handle a wide range of load sizes and feature our exclusive interchangeable motor cartridge. These barrels also feature our convenient clutch, enabling rapid cylinder positioning when loading or removing parts. Medium barrels come with either stainless hardware (below solution level) for most applications, or titanium hardware for strong acid bath applications. Style options include B, C, C-1 or square hole cylinder.
Please Note: When ordering, specify plastic tipped rod dangler, ball dangler or floating rod dangler types and motor RPM with mesh type required.
Models 66, 69 and 612 Are Available as Follows:
- Standard Configuration
- 6″ x 6”, 6″ x 9″ or 6″ x 12″ Cylinder
- Mesh or Square Hole Panel Construction
- C-1 Mesh (0.01″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
- Square Hole (0.093″ non-mesh opening)
- Super Square Hole (0.220″ non-mesh opening)
- 28 or 57 RPM Motor (5.5 or 11 Cylinder RPM) – 110 Volt AC Motor; Optional DC & different RPMs available
- Ball, Rod or Floating Rod Danglers
- Titanium or Stainless Cylinder Panel Screws
Sterling Barrel Model 8512-918 – Larger
Model 8512-918 Is Available as Follows:
- Standard Configuration
- 8 1/2″ x 12″ or 9″ x 18″ Cylinder
- Round or Delta Style Cylinders
- Mesh or Square Hole Panel Construction
- C-1 Mesh (0.01″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
- Square Hole (0.093″ non-mesh opening)
- Super Square Hole (0.220″ non-mesh opening)
- 30 or 60 RPM – 110 Volt AC Motor; Optional DC & different RPMs available
- Ball, Rod or Floating Rod Danglers
- Titanium or Stainless Cylinder Panel Screws
Sterling Barrel Model 1018-1024 -1224 – Largest
Models 1018, 1024 and 1224 Are Available as Follows:
- Standard Configuration
- 10″ x 18″, 10″ x 24″ or 12″ x 24” Cylinder size
- Mesh or Square Hole Panel Construction
- C-1 Mesh (0.01″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
- Square Hole (0.093″ non-mesh opening)
- Super Square Hole (0.220″ non-mesh opening)
- 30 or 60 rpm – 110 Volt AC Motor; Optional DC & different RPMs available
- Ball, Rod or Floating Rod Danglers
- Titanium or Stainless Cylinder Panel Screws
Sterling Barrel Model 60 Basket – Oblique
Model 60 Basket – Oblique Is Available as Follows:
- Includes both a 2 1/2″ x 4″ basket and a 6″ x 6″ basket
- Basket Mesh Construction
- C-1 Mesh (0.01″ opening)
- C Mesh (0.02″ opening)
- B Mesh (0.03″ opening)
- 10 RPM – 110 Volt AC Motor; Optional DC & different RPMs available
Mesh Dipping Baskets
Sterling Baskets – for Dipping or Spin Dryers Include the Following:
- 2 1/2″ x 4″ Polypro Mesh Baskets with 0.004″, 0.006″, 0.008″, 0.02″ or 0.033″ Mesh ASTM Openings
- 6″ x 6” Polypro Mesh Baskets with 0.01″, 0.02″ or 0.03″ Mesh Nominal Openings
- 6″ x 6” Stainless Mesh Baskets with Polypro Frame with #40 Mesh Openings
- 12″ x 12” Polypro Mesh Baskets with 0.02″ Nominal Mesh Openings
- 12″ x 12” Stainless Mesh Baskets with Polypro Frame with #40 Mesh Openings
CONTACT US
Fill out this form to get in touch or call us directly.
OFFICE LINE
1.413.739.2541
TOLL FREE
1.800.888.2541
FAX NUMBER