ALUMINUM FINISHING
We provide the only powdered formulation available on the market today for non-hexavalent chromium conversion coating. This product outmatches its hexavalent counterparts for both quality and cost. It is also listed on the QPL, meeting all requirements for MIL-DTL-5541F, Type II, Class 1A and Class 3. For more information we invite you to watch our VIDEO.
Aluminum Finishing Chemicals
A powdered product used to form a non-hexavalent chromium conversion coating on aluminum surfaces. The process delivers exceptional corrosion protection at a low cost, while forming an excellent base for paint, lacquer or rubber bonding. The coating can be applied by immersion, spray, brush, swab or roll coating. Usage requires no electric current, cooling or exhaust. Luster-On Aluminescent yields clear, slightly iridescent films while forming a protective surface with low electrical resistance. Luster-On Aluminescent is suitable for both wrought and cast aluminum alloys. The product is designed for ease of operation with minimal process controls required. Conversion coatings generated by Luster-On Aluminescent are compliant with European REACH, RoHS, ELV and WEEE directives. Aluminescent is listed on the QPL, meeting all requirements for MIL-DTL-5541F, Type II, Class 1A and Class 3.
A liquid product used to form a non-hexavalent chromium conversion coating on aluminum surfaces. The process delivers exceptional corrosion protection at a low cost while forming an excellent base for paint, lacquer or rubber bonding. The coating can be applied by immersion, spray, brush, swab or roll coating. The product requires no electric current, cooling or exhaust. Luster-On Aluminescent yields clear, slightly iridescent films while forming a protective surface with low electrical resistance. Luster-On Aluminescent is suitable for both wrought and cast aluminum alloys. The product is designed for ease of operation with minimal process controls required. Conversion coatings generated by Luster-On Aluminescent are compliant with European REACH, RoHS, ELV and WEEE directives. Aluminescent is listed on the QPL, meeting all requirements for MIL-DTL-5541F, Type II, Class 1A and Class 3.
A thickened liquid product used to form a non-hexavalent conversion coating on aluminum and zinc-nickel alloy surfaces, where immersion of the part is not possible. Typical applications include field repair of previously coated assemblies and protection of assemblies that cannot be immersed in liquid or coated prior to assembly. The coating can be applied by spray, brush, swab or roll coating. Usage requires no electric current, cooling or exhaust. Luster-On Aluminescent TX yields clear, slightly iridescent films while forming a protective surface with low electrical resistance. Luster-On Aluminescent TX contains a thickener that enables it to be painted onto the surface being protected. The conversion coating product is suitable for both wrought and cast aluminum. Conversion coatings generated by Luster-On Aluminescent TX are compliant with European RoHS, REACH and ELV directives and meet or exceed the requirements of Mil-DTL-5541F, Type II, Class 1A and Class 3.
A RoHS compliant, trivalent chromium-based sealant for Type II and Type III sulfuric acid anodized aluminum. Luster-On AS 950 has shown to perform better at lower cost than nickel acetate and hot-water seals. The product can be applied at far lower temperatures than standard aluminum seals. It may affect the appearance of certain dyes.
A RoHS compliant, heavy-metal-free sealant for Type II and Type III sulfuric acid anodized aluminum. Luster-On 990 seals both dyed and non-dyed anodized aluminum surfaces. Luster-On AS 990 has proven to perform better at lower cost than nickel acetate and hot-water seals. Luster-ON AS 990 can be applied at far lower temperatures than standard aluminum seals and provides excellent corrosion protection, when exposed to neutral salt spray.
Luster-On 224L
A liquid material producing a chromate conversion coating on aluminum and aluminum alloys. The product is suitable for both wrought and cast aluminum alloys. Spray or immersion applications produce clear or yellow coatings with excellent corrosion protection at an economical cost. The Luster-On 224L solution can be rejuvenated by eliminating contaminants. Luster-On 224L has met the requirements for listing on the Qualified Products List under MIL-C-81706 for MIL-C-5541 Type I, Class 1A application.
CONTACT US
Fill out this form to get in touch or call us directly.
OFFICE LINE
1.413.739.2541
TOLL FREE
1.800.888.2541
FAX NUMBER